KO Propo KO-40456 有刷电调-轻识

Description:

This is KO Propo VFS-FR3 Brushed ESC Set. A simple, ready-to-use design that allows you to install it right out of the box. It comes with preset programs that are compatible with any car. Additionally, motor connections are made easy with connectors, ensuring a hassle-free setup. Just follow the manual for initial setup, and you'll be ready to drive in no time.

Lithium Polymer and Lithium Ferrite batteries can be damaged by over-discharge, but the VFS-FR3 is equipped with a low voltage cutoff function, allowing you to play without worrying about over-discharge. In the past, a PC was required to change the settings, but now with the VFS-FR3, you can select the battery mode during the initial ESC setup. You can also check which battery mode is selected by the LED status.

You can now set the time delay before entering reverse after pulling the trigger on the transmitter. This feature helps prevent accidental reversing during fine brake control, similar to pumping the brakes. During the initial ESC setup, you can choose from three levels. Additionally, more detailed settings can be adjusted using the manager software.

Now compatible with KOPROPO's proprietary "HCS" system, reducing the communication processing time between the receiver and ESC by 1/4 for a more direct control feel. The mode automatically switches when connected to an HCS-compatible receiver. Of course, it can still be used in normal mode, so no changes are needed from previous compatible models.

Equipped with a 6V 3A BEC circuit (receiver/servo power circuit), the VFS-FR3 uses high-capacity components, unlike the 1.5A parallel elements often found in overseas products. This ensures that even when using two high-current servos for 4WS systems, the circuit will not be damaged. Additionally, the built-in limiter function activates in the event of issues like steering lock, so you can use it with peace of mind.

While you may start with the standard motor from the kit, as you gain experience, you'll want to push for more speed. The VFS-FR3 has no motor turn limit, so when you're ready to unleash even more performance, you can adjust the drive frequency to maximize the potential of high-spec motors. It delivers the same powerful output as the VFS-FR2.

Feature:

An Easy-to-Use ESC for Beginners and Veterans Alike
Equipped with a Low Voltage Cutoff Function!
Back Timer Setting Function Added
Compatible with KOPROPO's proprietary HCS
Powerful BEC Circuit for Safe Use with Two Servos!
Suitable for Experienced Drivers!
Foward / Reverse / Brake function.

Specification:

Dimensions: 32.6× 29.0× 19.4mm
Weight: 25.3g (Main Unit Only)
Compatible motor: Brushed motor unlimited
Maximum peak current: 1200A (FET Spec)
Maximum continuous current: 300A (FET Spec)
Rated Current: 120A (FET Spec)
Drive Frequency: 0.50(±0.3) - 7.00(±0.3)kHz (64 steps)
Operating voltage: 6.6 to 8.4V (BEC output voltage: 6.0V)
BEC output: 6.0V/3A

Include:

KO Propo VFS-FR3 Brushed ESC (1 set)