Tamiya CB1189 货柜车 Semi Truck
1/14 平治 Mercedes-Benz Arocs 3348 6x4 Tipper Truck EP Car Kit w/ Electric Actuator Combo Set
Feature:
Tamiya 1/14 Mercedes Benz Arocs 3348 6x4 Tipper Truck EP Car Kit w/ Electric Actuator Combo Set #CB1189
Combo Included:
- Tamiya 1/14 Mercedes Benz Arocs 3348 6x4 Tipper Truck Car Kit EP #56357
- Tamiya 1/14 Scale Tipper Truck Electric Actuator Set #56545
Tamiya 1/14 Mercedes Benz Arocs 3348 6x4 Tipper Truck Car Kit EP #56357
Description:
This is Tamiya 1/14 Mercedes Benz Arocs 3348 6x4 Tipper Truck Car Kit EP. This is a highly accurate 1/14 scale radio control model that recreates the Mercedes-Benz Arocs dump truck. It features a highly realistic truck bed section behind the cab which can be operated by the radio transmitter, using the separately-sold Actuator Set (Item 56545)!
The model''''s ladder frame chassis features aluminum side channels with resin cross members and is equipped with a highly realistic suspension utilizing metal leaf springs and friction dampers. A front-mounted motor and 3-speed transmission power the two rear wheel axles, which are fitted with built-in differentials to enable smooth cornering. A 4-channel R/C system and multi-function unit allow you to drive the vehicle and experience realistic lights, sounds and vibrations. (Both sold separately)
Feature:
- Chassis: Ladder frame with aluminum channels and resin cross members
- Cabin: Tilt forward operation just like full-size truck
- Drive: Shaft driven from front mounted motor to rear axles which are
- equipped with differentials
- Motor: RS540 brushed
- Transmission: Three speed servo controlled constant mesh
- Suspension: Die cast metal front axle and reinforced resin rear
- axles float mounted on metal leaf springs and coil spring shocks
- Cab: Highly detailed with air tanks, mirrors and metal transfers
- depicting emblems and numerous metal plated parts, truck bed
- section behind cab can be operated by the radio transmitter, using
- the separately-sold Actuator Set (Item 56545)
- Shocks: Aluminum body friction (not oil-filled)
- Body: ABS plastic
- Wheels: Chrome plated plastic
- Tires: Ten, treaded rubber construction
Specification:
- Length: 20.8" (529mm)
- Width: 7.5" (190mm)
- Height: 10.5" (267mm)
- Wheelbase: 10.7" (272mm)
- Gear Ratio: Low Gear 1:32.49
- 2nd Gear 1:17.66
- 3rd Gear 1:10.66
Include:
- 1/14 scale Tamiya Mercedes-Benz Arocs 3348 6x4 tractor truck kit
- 540 motor
- Tires
- Wheels
- Decal sheet
- 3-speed transmission,
- Instructions
- Coupler unit for trailer
Require:
- Radio
- Servo
- Electronic Speed Control (Tamiya TEU302BK recommended, do not use the Tamiya TEU101BK or the TEU104BK)
- Battery
- Battery Charger
- Tools
- Spray
Tamiya 1/14 Scale Tipper Truck Electric Actuator Set #56545
Description:
This actuator set is designed to complement the Mercedes-Benz Arocs 3348 Dump Truck. When using a 4-channel transmitter, the dump feature of the trucks bed can be fully controlled.
Feature:
- The ACU-01 Unit is a compact actuator unit for Tamiya R/C tipper/dump truck beds.
- The included geared motor (gear ratio = 64:1, size = Type 280) raises and lowers the truck bed via command from the ACU-01 unit, from a transmitter or the manual included switch.
- Limit switches ensure that the truck bed does not move beyond the defined range.
- Recommended for use with Tamiya 4ch Attack 2.4Ghz radio. Item 7255252
- Note: This product cannot be used together with Motorized Support Legs (Item 56505), as it uses the same R/C channel.
- This model can be used with standard ESCs, or the MFC-01 (Item 56511) and MFC-03 (Item 56523) multi- function control units.
- Compatible with 1/14 scale R/C tipper/dump truck models.
Include:
- Tamiya 1/14 Scale Tipper Truck Electric Actuator Set (1 set)
- Chassis: Ladder frame with aluminum channels and resin cross members
- Cabin: Tilt forward operation just like full-size truck
- Drive: Shaft driven from front mounted motor to rear axles which are
- equipped with differentials
- Motor: RS540 brushed
- Transmission: Three speed servo controlled constant mesh
- Suspension: Die cast metal front axle and reinforced resin rear
- axles float mounted on metal leaf springs and coil spring shocks
- Cab: Highly detailed with air tanks, mirrors and metal transfers
- depicting emblems and numerous metal plated parts, truck bed
- section behind cab can be operated by the radio transmitter, using
- the separately-sold Actuator Set (Item 56545)
- Shocks: Aluminum body friction (not oil-filled)
- Body: ABS plastic
- Wheels: Chrome plated plastic
- Tires: Ten, treaded rubber construction
- The ACU-01 Unit is a compact actuator unit for Tamiya R/C tipper/dump truck beds.
- The included geared motor (gear ratio = 64:1, size = Type 280) raises and lowers the truck bed via command from the ACU-01 unit, from a transmitter or the manual included switch.
- Limit switches ensure that the truck bed does not move beyond the defined range.
- Recommended for use with Tamiya 4ch Attack 2.4Ghz radio. Item 7255252
- Note: This product cannot be used together with Motorized Support Legs (Item 56505), as it uses the same R/C channel.
- This model can be used with standard ESCs, or the MFC-01 (Item 56511) and MFC-03 (Item 56523) multi- function control units.
- Compatible with 1/14 scale R/C tipper/dump truck models.
- Length: 20.8" (529mm)
- Width: 7.5" (190mm)
- Height: 10.5" (267mm)
- Wheelbase: 10.7" (272mm)
- Gear Ratio: Low Gear 1:32.49
- 2nd Gear 1:17.66
- 3rd Gear 1:10.66
- Radio
- Servo
- Electronic Speed Control (Tamiya TEU302BK recommended, do not use the Tamiya TEU101BK or the TEU104BK)
- Battery
- Battery Charger
- Tools
- Spray
Specification:
- Length: 20.8" (529mm)
- Width: 7.5" (190mm)
- Height: 10.5" (267mm)
- Wheelbase: 10.7" (272mm)
- Gear Ratio: Low Gear 1:32.49
- 2nd Gear 1:17.66
- 3rd Gear 1:10.66
Include:
Required:
- Radio
- Servo
- Electronic Speed Control (Tamiya TEU302BK recommended, do not use the Tamiya TEU101BK or the TEU104BK)
- Battery
- Battery Charger
- Tools
- Spray
评论