3Racing KIT-CERO ULTRA VER2.0 平路房车 Touring
Description:
This is 1/10 Cero Ultra Ver.2 Touring Car Kit EP. In the second generation of Cero Ultra 2.0, the main improvement is to use a shorter and narrower chassis to improve the frame's cornering efficiency. The belt length is S3M345 x 2. Used this shorter belt to achieve a shorter chassis and more direct acceleration output. The front and rear lower wishbones have been carefully improved to more room for the anti-roll bar movement and a shorter wheelbase. The lay-down front and rear absorbers mounting make the body roll more efficient, the main chassis has a new weight distribution position and a shorty battery socket, and the diameter of the lower wishbones rolling shims has been increased to improve the durability of the chassis plate, a caster has been added to the rear upright to increase the speed of all corners, and the steering system has changed to M4 X 7 bearings To improve accuracy, the upper deck was shortened to accommodate the twist of the frame.
Feature:
2xS3M345 Bando Belts To Obtain Drive-Shaft Output Directly
TPU Bumper Is Standard
Newly layout of 2.25mm Graphite Chassis ( Shorter 6mm and narrowed 77mm)
Rapid Spur Gear Change Solution
All NMB (Japan) Ball Bearing
Newly Double Wiper Steering System
Lay down the F & R Absorber mounting
Newly layout of Graphite Lower Wishbones
Rapid battery Socket
Anti-Slap Pad
Rear Drive Shaft Jacket
Newly Cooling Fan Mounting
Shorty Battery Socket
Specification:
Overall length: 390mm
Overall Width: 188mm
Wheelbase: 257mm
Thread (F/R): 188/187mm
Ratio: 1.9:1 (Internal)
Include:
3Racing 1/10 Cero Ultra Ver.2 Touring Car Kit EP (1 set)
Required:
Radio System (Min. 2ch)
ESC
Motor
Servo
Pinion
Body
Battery
Charger