KO Propo KO-10741 遥控器-轻识

This is KO Propo EX-NEXT Black SP w/ KR-420XT Double Receiver. A new black color has been added to the EX-NEXT lineup. Instead of simple solid black paint, it is painted in black with pearl. The matt texture gives it a luxurious feel. The painted areas are the master unit and the standard grip stand. The stand for the Expert grip unit LDT is not painted.

You can choose and use from "XT advanced mode" which is the world record response for one way communication and "XT telemetry mode" which is compatible for Telemetry ( 2 ways communication). An all new control software and radio communication software of the EX-NEXT has been developed. World record communication response and High resolution control are installed. "XT Advanced mode" that is the highest speed in EX-NEXT is about 3 times the speed of the EX-RR. The performance far exceeds the conventional high-speed communication. High-speed communication in the XT advanced mode improves the information density that will be sent to the receivers. You will feel a "Fine and smooth maneuvering feeling" by unprecedented high-definition and high-resolution control when operating. EX-NEXT supports "XT Telemetry mode" that uses 2-way communication. When "4S series servos" that support serial compatible are connected to the B/S port in the new receiver KR-420XT, you can use "REAL TIME ICS". So, you can easily change parameters of servos from the transmitter without accessing the car directly. Setting your car with more freedom and more detail without compromise. Also, even using the XT Telemetry mode that is 2-way communication, the High-speed response is still faster thanthe EX-RR.

Currently mainstream servo control method is performed by PWM control. PWM control method uses pulse width to send position of servos output from receiver. Serial control method uses a digital signal value to send the position of the servo output. So, communication speed of the Serial control method will be significantly faster than a PWM control method, time ofthe servo’s action from your operation input is shorter. Operating feeling will be ultra high speed like operating thecar directly.

EX-NEXT & KR-420XT support the use of HCS that was adopted from the RSx3, BSx3 series. Until now, it was necessary to change the receiver mode using the settingdevice, but with EX-NEXT this can be changed from the transmitter for each channel. HCS compatible servos are automatically change to HCS mode when the received signal is HCS. If you want use HCS, please connect servos to 1-4ch ofthe KR-420XT.

KR-420XT supports “REAL TIME ICS" that is a new serial communication to servos . You can use "REAL TIME ICS" by connecting to the B/S port using the BSx4-one10 Grasper2 that supports serial communication. There is only one B / S port, but you can connect two or more devices by changing the device ID number and using a twin extension cable. You can use "REAL TIME ICS" in a GP car or other categories too. If you use 2 servos with GP car, connect the 2 servos to the B/S port using the Servo Twin Extension Wire II w/new plug. It is necessary to change ID number to 2 for the throttle servo, but it is easy to change by connecting it to the Xpansion of EX-NEXT.　

The ultra-compact receiver KR-420XT, which is equipped with the latest devices abundantly for the EX-NEXT. While maintaining the same footprint as the KR-418FH compact receiver, which has been very well received, the connector mounting height has been reduced, and the total volume is smaller then before. 5 Connecting ports for servos or ESC are equipped. Also, unused connecting ports can be use to power cooling fans and transponder for lap counting systems. KR-420XT has the capability to install an antenna pipe toreceiver case directly just like the KR-415FHD, which has been very well received. The footprint is the same as the conventional model KR-418FH, but you can save the troubleof installing an antenna mount.

The UI (user interface) of the setup switch and pilot LED has also been reviewed. In addition to the same handling as the conventional KO PROPO receiver, pairing and RF mode switching functions have been additionally implemented without turning the power on / off.KR-420XT has the capability to install an antenna pipe to receiver case directly just like the KR-415FHD, which has been very well received. The footprint is the same as the conventional model KR-418FH, but you can save the trouble of installing an antenna mount.

Equipped with a vibration motor that has been requested. This can be used for alarms that notify the running time and alerts for various sensors. In addition, the LED on the front of the master unit is a full-color LED. The radio wave mode in use and the alert content of the vibration motor can now be identified by the LED lighting pattern. EX-NEXT is equipped with the evolved "LCD Xpansion unit 2 EXP-201" as standard equipment. New telemetry, XT radio mode, supported menu, and also the newly added setting function for ICS compatible servo are standard. Serial compatible servos which support "REAL TIME ICS" and conventional ICS compatible servos can be used. Change settings of an ICS servo by only using the Xpansion unit 2 without using a PC or servo model selector.

Tuned for the evolution of the EX-NEXT to match the fastest feeling master unit as an exclusive use unit. Prevents deterioration of durability and operational feeling due to wear, which can be said to be the problem of contact sensors. Along with smooth operation feeling by smoother sliding, we realize high durability that is approximately 100 times compared with the prior sensor. Therefore, the best feeling of operation can be maintained for a long time. In addition, the new sensor outputs a more linear signal to the Master Unit. You can control the ESC and servo with a detailed operation sense. A realization of a sense of unity between people and cars. The number of ball bearings supporting the steering shaft has been increased from one to two. The double-support type supports higher precision operation and reliability. The normal spring included in the extension unit has been modified. The previous spring used was a progressive spring becoming stiffer as the wheel angle increased, but the new softer spring give a linear stiffness as the wheel angle increases. Since the spring tension can be adjusted, you can set the spring tension to your personal preference.

Feature:

Equipped with a new standard "XT" that achieves the fastest communication speed in the industry
High speed supported by Serial servo
Supported HCS
Firmware Ver.2.00 compatible with MINI-Z
Ultra small receiver KR-420XT
Equipped with a terminal compatible for serial communication
Ultra small dimensions case
Install antenna pipe to receiver case directly
Pairing device without Power cycle
Intuitive alert function with vibration and full-color LED
Xpansion 2 that can change the ICS setting of the servo is standard equipment
New Drop down extension Unit 2.1
Superior durability and operation feeling led by new angle sensor
Increased the number of ball bearings that support the steering shaft for higher accuracy
The soft spring which can be operated with a constant tension

Specification:

Dimensions: 240.5 x163.0 x107.2mm (Does not include protrusions)
Weight: 551g (battery not included)
Current: 200mA or less
Channel: PWM 4ch / Serial 8ID
Frequency: 2.4GHz
Radio Mode: XT
Model memory: 50

Include:

Master Unit EX-NEXT (Black SP) (1 pc)
LCD Xpansion Unit2 EXP-201 (1 pc)
Aluminum Steering Wheel6 (1 pc)
Drop extension Unit 2.1 (1 pc)
Expert grip unit 2 (Black SP) (1 pc)
KR-420XT (2 pcs)

Required:

Batteries