Hobbywing 81030000 无刷电调

Hobbywing EZrun Brushless Sensorless 18A-SL-H (Version 2.0 USB Supported) +12T Motor (KV 7800)+Programcard Combo Set

This Hobbywing Ezrun combo set (Combo-A1) is same as the Hobbywing Ezrun combo (Combo 15-car) plus new features, please scroll down the description for full details

Motor Description:

• This is the EZrun Brushless Sensorless 18A-SL-H (Version 2.0 USB Supported) +12T Motor (KV 7800)+Programcard Combo Set for RC cars and trucks.

• Design: Sensorless-Based
• Operated with: Brushless ESC
• Size: Similar to Brush Motor 130
• Diameter: 30 x 20.5 x 20.5 mm
• Fixed Motor Screw Hole: Hole A Length: 16mm, Hole B Length: 14mm, Hole C Length: 12.5mm
• Rotor for Gear: 1.98 mm

• KV: 7800

ESC Description:

• The EZrun series brushless controls (Version 2.0) include ESC of 18A, 25A and 35A for RC cars and trucks.

• With 3 running modes: Racing mode (Forward), Forward/Backward mode and NEW Rock Crawler mode.
• Especially designed for RC car, with excellent start-up, acceleration and linearity features
• Compatible with sensorless brushless motor
• Use top quality of electronic components to enhance the current endurance and capacity of the ESC.
• 4 steps of maximum reverse force adjustment
• Proportional ABS brake function with 4 steps of 4th – 11th maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
• 9 start modes (Also called “Punch”) from “soft” to “very aggressive”.
• Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
• 8 steps of timing adjustment.
• Waterproof and dustproof.
• Easily program with only one button and compatible with pocket-sized program card.
• Dustproof design for the motor.
• Motor uses top quality materials: ---Aluminium shell (case) ---High quality magnets ---Copper wires of high temperature endurance ---Good quality bearings.

• Burst Current: 50A
• Resistance: 0.01 ohm
• Suitable Car: 1/18, 1/16 car
• Suitable Brushless Motor: > 12T (2030 brushless motor)
• Battery: 4-9 Cell Ni-xx (NiMh or NiCd) or 2-3 Cell Li-Po
• BEC Output: 6V/1A
• Motor Type: Sensorless Brushless Motor
• Dimension: 31.5 x 27.5 x 15 (mm)
• Weight: 19g (Without wires)

• 12T Senserless Brushless Motor (1 Pc)
• Program card (1 Pc)
• Cable Tide (2 Pcs)
• Shrink Tube (3 Pcs)
• Hobby Wing Decal (1 Pc)
• Instruction

Feature:

• For: 1:18 RC
• The ESC is USB supported. The firmware of the ESC can be updated through an USB adapter on the Advanced LCD Program Box (Optional device).(NEW)

Specification:

• Turns: 12 T
• Cont. Current: 18A

Include:

• EZrun-18A-SL-H (Version 2.0) (1 Pc)