LRP LRP80970 无刷电调-轻识

LRP Flow WorksTeam Brushless speed control #LRP80970

Description:

LRP celebrates an impressive comeback with latest technology! After Ronald Völker’s overall victory at the ETS 2011/12 with a pre-production version of the LRP Flow against the best drivers of the scene, the final production version totally convinced at the IFMAR 1/12 and TC Worlds 2012. The clearly best performance with best lap times and fastest qualifying run in TC as well as the fastest final run in 1/12 impressively showed the potential and class of this newly developed high-end brushless speedo from the Blue is Better company. With a total of 5 Flow WorksTeam speed controls in the A-Mains, it also was the most successful speed control at the IFMAR WC 2012.

The hard- and software of the Flow speed controls have been designed completely from scratch, the speedo can now be universally used with modified and stock motors. Due to the multitude of mode setup options, it can be precisely adapted to all requirements and classes.

Users can update their firmware by downloading the latest version of firmware in LRP website, but please be noted that the USB Bridge was not included in this set. Please search "LRP USB Bridge ver. 2 - Speedo Firmware Update + PC-Link #81801" for purchase.

Feature:

For: RC Cars
Modified and Stock Racing - All purpose onroad and offroad software for modified and stock classes,
incl. boost 0
Multi-mode profile adjustment - 7 fully adjustable parameters for stock and modified: auto brake, feel, torque timing, boost timing, boost angle, boost turbo, cutoff voltage
HD full aluminium case - For lowest core temperature and tough race design
Bulletproof 6V/3A linear BEC
Easysolder U-Tab Design - Heavy copper, multilayer PCB for lowest resistance
X-Brake Pro - New efficient and precise brake software
USB Software Updateability - Benefit from all the latest performance
improvements and updates available at www.LRP.cc
Revolutionary Internal Temp Check System 3 - Allows you to read out the
maximum internal temperature for each the speedo and motor
Extra small size - 32x34x21mm for easy installation in all cars
Including plugged high-performance fan

Specification:

Case Size: 32x34x21 mm
Votage Input: 3.7 - 7.4V
BEC: 6.0V/3.0A Linear
Sensored Brushless System: Yes
Forward/Brake: Yes
Multi Mode Profile Adjustment: Yes
Multi Protection System2: Yes
Internal-Team-Check System 3: Yes
Power Wires: 3.3mm
Rec Motor Limit: Over 3.0T
Rated Current: 400A/Phase
Typical Voltage Drop: @20A-0.011V/Phase
Weight (exclude Wires): 40g
Plugged Fan: Yes

Include:

LRP Flow WorksTeam Brushless speed control (1 pc)