Axial AXI00002V2T2 攀爬车 Crawler
Description:
This is Axial 1/24 SCX24 2019 Jeep Wrangler JLU Yellow Version 4WD Rock Crawler Brushed RTR w/ 2.4GHz Radio. No matter where you are, the 1/24 scale Axial® SCX24™ Jeep® Wrangler JLU CRC 4WD makes it the scene for RC adventures. If you’re stuck at work, go crawling on your desk. A messy room becomes an ideal obstacle course. Take your vehicle outside — where its water-resistant electronics are safe from the elements — and set up an exciting trail with a few holes, twigs, and rocks. Full-time 4WD and a 3-link front/4-link rear suspension let you muscle over big challenges. Worm gears on the axles increase ground clearance, while realistic steel frame rails stand up to hard knocks. The Axial® SCX24™ Jeep® Wrangler JLU CRC performs like a winner and looks like one, too. The realistic body rides on licensed KMC Machete wheels and Nitto Trail Grappler tires. For quick battery access, just remove one clip to tilt back the body. Two LEDs in the front bumper light up the trail for night-time crawling. The SCX24™ Jeep® Wrangler JLU CRC comes ready-to-run with radio and electronics included and installed.
Feature:
Receiver: Included
Shock Type: Coil-Over, Plastic Body, .9 - 1.3" (24 - 33.4mm)
Charger: Included
Differential: Worm gear 16T/4T
Motor Type: Brushed
Rear Track: 3.9 in (99.5mm)
Speed Control: Included
Wheelbase: 5.2" (132 mm)
Front Track: 3.9 in (99.5mm)
Product Width: 3.9" (99 mm)
Radio Included
Tire Tread: Trail Grappler
Vehicle Type: Rock Crawler
Water-Resistant: Yes
Ball Bearings: Full set
Chassis: Stamped Steel Chassis Rails
Completion Level: Ready-To-Run
Drivetrain: 4WD
Drive Type: Forward/Brake/Reverse
Product Height: 4.2" (107 mm)
Approximate Assembly Time: No assembly required
Body: Axial Jeep JL Hardtop
Brakes: Integral with ESC
Pinion: 10T
Scale: 1/24
Battery: Included
Ground Clearance: 1.06" (27mm)
Motor Size: 030 Brushed Electric Motor
Product Length: 7.8" (198 mm)
Spur Gear: 55T
Suspension: 3 Link Front and 4 Link Rear
Wheel Width: .48" (12.4mm)
Power Type: Electric
Servos: Included
Specification:
Receiver: Included
Shock Type: Coil-Over, Plastic Body, .9 - 1.3" (24 - 33.4mm)
Charger: Included
Differential: Worm gear 16T/4T
Motor Type: Brushed
Rear Track: 3.9 in (99.5mm)
Speed Control: Included
Wheelbase: 5.2" (132 mm)
Front Track: 3.9 in (99.5mm)
Product Width: 3.9" (99 mm)
Radio Included
Tire Tread: Trail Grappler
Vehicle Type: Rock Crawler
Water-Resistant: Yes
Ball Bearings: Full set
Chassis: Stamped Steel Chassis Rails
Completion Level: Ready-To-Run
Drivetrain: 4WD
Drive Type: Forward/Brake/Reverse
Product Height: 4.2" (107 mm)
Approximate Assembly Time: No assembly required
Body: Axial Jeep JL Hardtop
Brakes: Integral with ESC
Pinion: 10T
Scale: 1/24
Battery: Included
Ground Clearance: 1.06" (27mm)
Motor Size: 030 Brushed Electric Motor
Product Length: 7.8" (198 mm)
Spur Gear: 55T
Suspension: 3 Link Front and 4 Link Rear
Wheel Width: .48" (12.4mm)
Power Type: Electric
Servos: Included
Include:
1/24 SCX24 2019 Jeep Wrangler JLU CRC 4WD Rock Crawler Brushed RTR (1 pc)
4-Channel 2.4Ghz Surface Transmitter (1 pc)
ESC/Receiver (installed) (1 pc)
88T Motor (installed) (1 pc)
AS-1 Micro Servo (installed) (1 pc)
Dynamite® 7.4v 350mAh 2S LiPo Battery (1 pc)
USB Charger (1 pc)
AA Batteries (4 pcs)
1/24 SCX24 2019 Jeep Wrangler JLU CRC 4WD Manual (1 pc)